Carbide Saw Blade

{Welcome to Power Tool Partner}

Don't Know Which Blade Is Right For You? You Should Read Our "diamond Blade Selection Chart"

If you’re looking for the right cutting solution that offer superior cuts and smooth performance at prices that can’t be beat --- then look no further. Gila Diamond Blades® saw blades, cup wheels, core bits, polishing pads and accessories boast high quality at an affordable price. Each Gila tool is carefully engineered and manufactured to maximize performance while stretching your tool budget.

Gila Diamond Products's line of diamond tools are designed to provide the optimum performance for different cutting material types. The following items will be important in selecting the correct blade for your application.

1. Knowing Your Machine - You need to find out what size of diamond blade, core bit or cup wheel would fit onto your machine with the right arbor size of either 7/8", 5/8", 20mm, 1", 50mm or 60mm.
2. For Dry or Wet cut - Most of the diamond blades, core bits, cup wheels or polishing pads can be used on dry or wet cutting. If we have specify "For Wet Cut Only" in the description of the item, you will have to use in wet cutting only to prevent damage. A dry rate blades can be use on dry cutting but the blade cooling should be considered during use. The cutting depth and interval should be reduced.  Water may be used to help keep down dust and provide better cooling and lubrication and improve cutting speed and life.
3. What Material To Be Cut - Each diamond blade, core bit, cup wheel or polishing pad have different type of diamond grit size, metal powder and level of diamond concentration. Choose the right diamond tool would give you the maximum cutting performance and longer blade life.
4. Performance Quality Required -We carry different grade of quality diamond tools for all kind of cutting performance at your budget. The higher quality usually will allow faster cutting speed and longer life but at a higher cost.

Blade Types - Diamond tools are produced using a few different manufacturing processes. The diamond cutting portion of a blade is made from a mixture of diamond and metal powders. The components and proportion of this can be varied to produce properties for different applications.

• The "Hot-Pressed Sintered" diamond tools have the diamond cutting rim/segment formed and bonded directly to the steel core in a high temperature and high pressure process.
• The "Laser Welded" diamond tools have pre-formed diamond segment fused to the steel core with a high power laser. This process will result in a weld that is as strong as the steel core itself and can withstand higher temperatures during dry cutting. The laser welded diamond blades are usually preferred for larger diameter blades and more demanding applications.
• The "Brazed Welded" diamond tools have pre-formed diamond segment fused to the steel core with a high temperature solder. The diamond cutting edge of this kind of blade may be made as a continuous rim or segmented by various shaped and sized slots or gullets.

Undercut Protection - Undercutting is where the steel core wears just under the point of the segment is attached due to cutting a abrasive materials. There are various form of undercut protection such as Slant Drop Segment, Drop Segment or Carbide Tip Inserts for added to the design of blades intended to cut abrasive materials.

Materials/Bond Hardness - The correct diamond tools are largely determined by the primary materials that will be cut. Harder materials require diamond tools made with a softer bond and softer materials require diamond tools made with a hard bond for efficient cutting performance and life. A general purpose or multi purpose diamond blades may be the best choice if a variety of materials will be cut. The bond materials in the segment can use a harder bond to maximize  the life of the diamond tool.

We invite you to give Gila products a try.  We’re confident that you won’t find finer cutting tools at a lower price—and we’re confident that you’ll be pleased, too.

About Gila Diamond Blades

Gila Diamond Products, Inc. is a factory direct supplier of professional quality diamond tools for many years in the construction and stone industries. We have achieved our goal through many years of experiences on extensive research, product testing and comparing, and by utilizing the latest technologies to bring you the best diamond cutting solutions to work on your machines and cutting materials. Our objective from the start was to create a destination where professional contractors of all sizes could find all the products they need.

Contact Information

Gila Diamond Blades

Tel: 909-548-6215

http://www.diamondbladesusa.com

About the Author

M.Hon is a intenret article writer

---

Backerboard, Cement Board, Blue Board. Call it whatever. Anyone found an easy way to cut it?

I've installed a fair amount of this stuff behind tub-surrounds & showers. I generally use a jig saw with a carbide blade, which promptly goes dull. Any experienced tile workers out there find a better way?

If you can handle a little dust, they make a cement board blade for a 7" circular saw. It has about 24 big teeth on it and it slices right though. It will give you a nice clean edge. But there is the dust factor so I always set up outside and use a dust mask. I've used the blade for about 3 years and it is still sharp.

---

Thank You.
We hope you found the

Carbide Saw Blade

you were looking for.