Time Battery Dewalt

{Welcome to Power Tool Partner}

How To Maximize Cordless Drill Battery Performance

Cordless Drill Battery Store-->Drill Battery Blogs

How to Maximize Cordless Drill Battery Performance

There are several steps you can take to insure that you get maximum performance from your cordless drill batteries:

Breaking In New Batteries: new cordless drill batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new battery two to four times to allow it to reach its maximum rated capacity.

Preventing the Memory Effect: Keep your cordless drill batteries healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-ion batteries which do not suffer from the memory effect.

Keep Your Batteries Clean: It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and your portable device.

Exercise Your Drill Battery:Do not leave your battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.

Battery Storage: If you don't plan on using the battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects. NiCad, NiMH and Li-ion batteries will self-discharge during storage; remember to break them in before use. Sealed Lead Acid (SLA) batteries must be kept at full charge during storage. This is usually achieved by using special trickle chargers. If you do not have a trickle charger, do not attempt to store SLA batteries for more than three months.

More info here:

http://www.pioneer-electronics.co.uk/How-To-Maximize-Cordless-Drill-Battery-Performance.htm

About the Author

www.any-batteries.co.uk offer Cordless drill batteries, Cheap laptop batteries, laptop ac adapters, laptop dc adapters, camcorder batteries, camera batteries, battery chargers.

High Quality & Superb Service, season promotion, 30% discount!

All batteries are 100% satisfation guarantee and 100% brand new with 1 year warranty! Our Advantages: Quality + Low Price + 100% Guarantee + Fast Shipping

---

Did you know that you don't have to pay huge $'s for replacement battery packs (ie. 12v,18v )? Make your own!

If you get on Ebay and look up Task Force 12v battery packs, people are selling those 10-20 times CHEAPER than the Dewalts etc. Look, all of these have the same 'c' size Ni-Cad batteries in them. You simply take the case apart and remove the array of batteries. Then you can take a low wattage soldering iron and some solder (flux core is easier to get to stick). Just use nyour basic common sense to immitate the configuration of the pack you want to replace.
Another trick I came up with was to take a vacuum cleaner hose repair- heat shrink tubbing wrap ( Hesco inc. dot com) and put enough batteries in it to equal 9.6 volts and carefully attached a Male (-) / Female (+) connection plug. Now on my Dewalt battery charger I put the correspondingly opposite Male (+) / Female (-) plug. Then on the back of my 9.6 volt Dewalt drill I put a smaller vacuum cleaner belt looped where the normal ( and expensive) OEM battery would plug in. This loop of strong rubber is what holds the battery.

All good information but there is really no question here.

---

Thank You.
We hope you found the

Time Battery Dewalt

you were looking for.